V5. “name”

Packet name, 0-8 characters, enclose within

 

 

quotation marks. The name you enter here is shown

 

 

as a custom configuration on the printer’s menu for

 

 

MODE. See “Setting the Mode” for more information.

D1

. D

Non-printable text/data field.

D2

. “vfr_comds”

Verifier commands. Must be enclosed within

 

 

quotation marks. Refer to the SV Series Operator’s

 

 

Guide for the complete list of verifier commands.

Example {V,1,A,T,”BEAMON”¦D,”~LV02”¦}

The verifier’s configuration packet ID is “1” and named “BEAMON.” The verifier packet is added to the verifier’s temporary memory. It uses Mode 2.

D e f i n i n g t h e V e r i f i e r F i e l d

The verifier field in a format references the verifier configuration packet ID to use for this particular format. The verifier field allows you to specify a different verifier configuration packet for each format, regardless of the format number. See “Defining the Verifier Configuration Packet,” for more information.

Note: If you do not specify a particular verifier configuration packet, the last sent verifier configuration packet is used.

Syntax V,vfrID¦

V1

. V

Verifier Field.

V2

. vfrID

Unique number from 1-999 to identify the verifier

 

 

configuration packet ID you want to use with this

 

 

format.

Example {F,25,A,R,M,508,508,"Fmt 25"¦V,3¦B,1,12,F,110,115,1,2,120,5,L,0¦

…}

Specifies to use verifier configuration packet ID #3 starting with format 25 and used until another verifier configuration packet is sent or specified.

Using the VCT 4-9