Consider this scenario when the error action is set to overstrike/continue 3x:
If the printer errors on the first label, an overstrike pattern is printed, but the printer attempts to reprint the image up to three times. If the third consecutive label also generates an error, an overstrike pattern is printed; however, the printer stops and the error message is displayed. The operator must resolve the error condition before printing continues.
In the above example, if the third label did NOT generate an error,
♦the batch image is printed
♦the consecutive error counter is reset
♦the printer continues processing the batch.
Normal (default) | The printer errors and the condition causing |
| the error is displayed. The error must be |
| cleared before operation can continue. |
| An operator must press Escape/Clear to clear |
| the error and continue printing. No overstrike |
| pattern is printed. |
Overstrike/Continue 1x | The printer prints an overstrike pattern on one, |
Overstrike/Continue 2x | two, three, four, or five consecutive labels and |
Overstrike/Continue 3x | stops printing after the selected number of |
Overstrike/Continue 4x | overstrike patterns have been printed. |
Overstrike/Continue 5x | An operator must press Escape/Clear to clear |
| the error and continue printing. Do not use the |
| label with the overstrike pattern. |
| Note: The printer |
| label) after a motion or verifier error. |
Configuring the Printer