8.Connect the other end of the I/O cable (with the 8-pin mini-din connector) to the back of the printer.

9.Connect the communication cable to the port on your computer with RJS ScanVision installed.

Verifier Connector for I/O Cable

Use this 9-pin verifier port for verifier to printer connections

Use this 25-pin serial port for computer to printer connections

If the verifier’s serial or I/O cable are disconnected from the printer, the printer displays “773 Verifier Fail.” See “Detecting the Cable” for more information. Make sure the cables are connected between the verifier and printer. If error 773 appears, press Escape/Clear to clear the error.

Use the serial port on the computer to configure the verifier using the RJS ScanVision software.

Installation & Setup 2-11