Statement of FCC Compliance: Canada

This Class B digital apparatus meets all requirements of the Canadian interference-Causing Equipment Regulations.

Cet appareil numénque de la classe B respecte toutes les exigences du Règlement sur le maténel brouilleur du Canada.

CE:

The unit will contain NRTL and/or CE quality assurance labels.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this operator’s manual, may cause harmful interference to radio communications. Operating this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the problem at his own expense.

Use with NRTL-Listed Equipment

The verifier should be used only with printers that are NRTL listed. The verifier is intended to be supplied by a NRTL Listed power supply (QQGQ) or (EPBU) or receives power from the host unit (NRTL Listed Printer), output rated 5Vdc, minimum 300mA maximum 1A.

L a s e r S c a n n e r S a f e t y

IEC Class3; CDRH Class III.

Cautions:

♦Never stare directly into the laser beam.

♦Never stare directly at a reflected image of the laser beam.

♦Avoid exposure to the laser beam.

♦Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

♦Use the verifier only with NRTL listed bar code printers.

♦These laser light caution labels must be affixed to your verifier: If they are not, contact Paxar immediately.]

♦Laser light - Do not stare into the beam.

Paxar shall not be liable for direct, indirect, or consequential damages, costs, expenses, lost profits, or lost savings resulting from the use, operation, or malfunction of the verifier.