D e t e c t i n g t h e C a b l e
You can configure the printer to detect when the serial and/or the I/O (input/output) cable is disconnected from the verifier.
To change the setting, from the Main Menu, select Setup, then Verifier. Then follow these steps.
1. Press or until you see
VERIFIER
Cable Detect
2.Press Enter/Pause. The current setting is displayed, for example:
VERIFIER
None
3. Press or to see the other options. After you display the option you want, press Enter/Pause.
If you select “None,” the verifier does not detect when a cable is disconnected.
To be notified when any cable (serial or I/O) is disconnected, select the I/O & Data option. If a cable is disconnected, error 773 appears. Check the connections between the verifier, printer, and host.
4.Press Escape/Clear until you see the Main Menu.
Configuring the Printer