V e r i f i e r E r r o r s
The printer
409Printer memory is full. Delete unnecessary formats or graphics from memory. You may need to format flash memory. From the Main Menu, select Setup, Flash Memory, and Format Flash.
Formatting flash memory is only required once during initial printer setup.
430The format uses a graphic or verifier configuration packet that cannot be found. See “Using the Verifier Field” for more information.
764Verifier scan error (bad scan) on label when using normal (no overstrike) mode. Press Escape/Clear to clear the error and continue printing. The printer
You can change how the verifier responds to an error. See “Setting the Error Action,” for more information.
Make sure you did not apply Option 62 (do not scan a particular bar code) to all bar codes on a format. See “Defining Option 62,” for more information.
772Verifier scan error (bad scan) on label or multiple labels in a row when using overstrike and continue mode. Press Escape/Clear to clear the error and continue printing. The printer
You can change how the verifier responds to an error. See “Setting the Error Action,” for more information.
773Verifier Failure – the verifier is enabled, but not connected. The printer can detect if the I/O and/or serial cable are connected to the verifier. See “Detecting the Cable” for more information.
783The printer is printing too fast for the verifier to accurately scan the bar codes. Increase the bar code height in your formats or slow the print speed.