C l e a r i n g D a t a
The verifier keeps track of the following items:
♦the number of labels verified sucessfully
♦the number of labels that failed verification/scanning
Depending on your application and volume of labels printed, you may want to clear this data daily or after each batch. This data is stored and only cleared when you select “Yes” to clear data.
To change the setting, from the Main Menu, select Setup, then Verifier. Then follow these steps.
1. Press or until you see
VERIFIER
Clear Data
2.Press Enter/Pause.Are You Sure?
No
3. Press or to see the other option. After you display the option you want, press Enter/Pause.
If you select “Yes,” all data collected since the last time it was cleared is erased.
If you select “No,” no data is erased.
4.Press Escape/Clear until you see the Main Menu.
Configuring the Printer