U S I N G T H E V C T

4

This chapter explains how to use the MonarchVerifier Configuration Tool (VCT) to create or modify a verifier configuration packet. This tool can be downloaded from our Web site. To install, follow the prompts as necessary.

The verifier supports Mode 2 and Mode 19, which are standard verifier modes. Mode 2 specifies nine different parameters to verify: ANSI defects, decodability, and grade; quiet zones; partial decodes, decode errors, passing percent decode; minimum number of I2of5 digits; and no read. Mode 19 specifies all parameters from Mode 2, plus contrast grade, wide to narrow ratio, and minimum and maximum X-dimensions. When you start the VCT, the different parameters are grouped by type, ready for you to change.

Depending on your application and which parameters you want the verifier to check, make your selections on the Verifier Hardware, Barcode Evaluation and (if necessary) Additional Values screens.

Using the VCT 4-1