Send Configuration to Verifier (via Printer)

To send the configuration through the printer to the verifier, make sure the serial cable from your computer is connected to the printer’s 25-pin serial port. This option does not save the configuration in the printer.

1.Select File, Send Configuration to Verifier via Printer.

2.Change communication settings if necessary. Click OK when finished.

Send Configuration to Verifier (via Direct Connection)

To send the configuration directly to the verifier from the computer, make sure the serial cable from your computer is connected to the verifier’s

9-pin serial port. The verifier can save up to 50 configurations.

1.Select File, Send Configuration to Verifier via Direct Connection.

2.Change communication settings if necessary. The verifier’s default settings are 115200, N, 8, 2, DTR. Click OK when finished.

See “Sample Verifier Configuration Packet” to see a sample MPCL verifier configuration packet.

C a b l e S u m m a r y

Some of these connections were discussed in the above sections “Store Configuration in Printer,” “Send Configuration to Verifier (via Printer),” and “Send Configuration to Verifier (via Direct Connection).”

You need a serial (communication) cable for all of these connections.

Action

Connect Verifier cable

Update the verifier’s configuration using ScanVision or

directly to host

Verifier Configuration Tool.

 

Use the printer’s offline menu to configure the verifier.

to printer

Update the verifier’s configuration by using the verifier field

to printer

in a format.

 

Store configuration packet in the printer’s flash memory.

to printer

Use F (Flash memory) in the configuration packet.

 

Send configuration packet through printer to the verifier.

 

Use T (Temporary) in the configuration packet.

 

Using the VCT 4-7