Save or Save As
1.Select File, Save or Save As… You can also click the buttons for these options on the toolbar.
2.Enter a filename and click Save. The file is saved with a .VFX extension.
Save as MPCL
1.Select File, Save As MPCL… or click the button for this option on the toolbar. You are prompted for a filename if you have not already entered one. Click Save.
2.Enter a configuration number. You can attach this configuration to a particular format by using this number in the verifier field in your format. See “Defining the Verifier Field” for more information. (Earlier VCT versions prompted you for the format number.)
3.Enter a configuration name, up to eight characters. The name you enter here appears in the offline menu for the mode selection. See “Setting the Mode” in Chapter 5 for more information.
4.Click OK.
5.Enter a filename at the prompt.
6.Click Save. The file is saved with a .MVF extension on the host. Send the file the way you normally send data to your printer: TCP/IP, serial, or parallel port; or using MPCL Toolbox’s File Download.
Using the VCT