
2 - Cyrillic keyboard switch
To switch the keyboard to the Cyrillic characters or back to Qwerty.
3 - Shift
To type uppercase characters.
4 - Ω Special characters
To open the onscreen keyboard to select accented characters or symbols.
5 - Fn key
To type a number or punctuation character
6 - Spacebar
7 - Share this
To share online what you are watching at the moment.
8 - Navigation and OK
*Your remote control has a Qwerty/Azerty or a Qwerty/Cyrillic keyboard, depending on your region.
Writing Text
With the keyboard on the back of the remote control, you can write text in any text field on screen. Turn the keyboard facing upwards to activate the keyboard keys. Hold the remote control with two hands and type with both thumbs.
Enter text
To enter text in a text field on screen, select the text field and start typing.
Press OK to confirm the text.
Uppercase and Lowercase
To type an uppercase character, press the (Shift) key just before you type the character.
To type several uppercase characters consecutively, press and hold the key while typing.
To type uppercase constantly, press the key for 2 seconds to switch the keyboard in uppercase mode.
To switch out of uppercase mode, press the key again. If no keys are pressed for 20 seconds, the uppercase mode switches off automatically. Also, if you press another modifier key, like Fn or Ω, you switch out of uppercase mode.
Numbers and Punctuation Characters
To type a number or punctuation character, press the Fn key just before you type the number or punctuation character you need. You can switch the Fn mode on or off as you do for the uppercase mode.
Internet
You can use the Fn key to enter www. or .com.
Accented Letters and Symbols
Accented characters and symbols are not directly available on the Remote Control Keyboard.
To type such a character, you can open the onscreen keyboard.
To open the onscreen keyboard, press Ω. In the onscreen keyboard, you can navigate to the character you need. Switch the keyboard layout with the colour keys. Press OK to enter a character. The onscreen keyboard disappears when you press a character on the Remote Control Keyboard.
Alternatively, you can enter special characters with the remote control SMS/text keypad on the front of the remote control.
Qwerty, Azerty and Cyrillic keyboard
The standard layout of the Remote Control Keyboard is Qwerty.
Azerty keyboard
Depending on your region, the Remote Control Keyboard can be set to Azerty. The Azerty characters are shown at the top right of the relevant keys.
To set the keyboard layout to Azerty… 1 - Press and press (left) Setup.
2 - Click General Settings > Remote Control Keyboard. 3 - Click Azerty or Qwerty.
4 - Press BACK repeatedly if necessary, to close the menu.
Cyrillic keyboard
Depending on your region, the Remote Control Keyboard can be switched to Cyrillic characters.
The Cyrillic characters are shown at the top right of the keyboard keys.
To write Cyrillic characters…
1 - Press on the remote control.
2 - Press again to switch back to Qwerty.
6.5
Link up with the TV
Pairing
This remote control uses radio frequency (RF) to send its commands to the TV. Contrary to remote controls using infrared signals, with this remote control you can send commands without pointing at the TV.
27