
available channels, select one or the other. The TV will install the satellite channels and radio stations.
8 - To store the satellite setup and installed channels and radio stations, click Finish.
Satellite CAMs
If you use a CAM – a Conditional Access Module with a smart card – to watch satellite channels, we recommend to do the satellite installation with the CAM inserted in the TV.
Most CAMs are used to descramble channels.
Newest generation CAMs (CI+ 1.3 with Operator Profile), can install all the satellite channels by themselves on your TV. The CAM will invite you to install its satellite(s) and channels. These CAMs not only install and descramble the channels but also handle regular channel updates.
Channel Packages
Satellites can offer channel packages that bundle free channels
If you choose a subscription package, the TV might ask you to select a Quick or Full installation.
Select Quick to install the channels of the package only or select Full to install the package and all other available channels too. We recommend a Quick installation for subscription packages. If you have additional satellites that are not part of your subscription package, we recommend a Full installation. All installed channels are put in the channels list All.
Unicable Setup
The Unicable System
You can use a Single Cable system, MDU or Unicable system to connect the antenna dish to the TV. A Single Cable system uses one cable to connect the satellite dish to all satellite tuners in its system. A Single Cable system is typically used in apartment buildings. If you use a Unicable system, the TV will ask you to assign a user band number and corresponding frequency during the installation. You can install 1 or 2 satellites with Unicable on this TV.
If you notice some missing channels after a Unicable installation, another installation might have been done at the same moment on the Unicable system. Do the installation again to install the missing channels.
User Band Number
In a Unicable system, each connected satellite tuner must be numbered (e.g. 0, 1, 2 or 3 etc.).
You can find the available user bands and their number on the Unicable switchbox. User band is sometimes shortened as UB. There are Unicable switchboxes that offer 4 or 8 user bands. If you select Unicable in the settings, the TV will ask you to assign the unique user band number for each
User Band Frequency
Next to the unique user band number, the
Automatic Channel Update
If you receive digital satellite channels, you can set the TV to automatically update these channels.
Once a day, at 6 AM, the TV updates the channels and stores new channels. New channels are stored in the Channels List and are marked with a . Channels without a signal are removed and if a satellite operator reorders its channel package, the channel list of the TV will be updated. The TV must be in Standby to automatically update channels. You can switch off Automatic Channel Update.
To switch off the automatic update… 1 - Press and press (left) Setup.
2 - Click Satellite Installation > Automatic Channel Update and click Off.
3 - Press BACK repeatedly if necessary, to close the menu.
You can set the TV to only update the channels of a specific satellite.
To mark satellites for updating…
1 - Press and press (left) Setup.
2 - Click Satellite Installation and click Automatic Update Option. In the list of satellites, click a satellite to mark or unmark. 3 - Press BACK repeatedly if necessary, to close the menu.
In certain countries, the automatic channel update is done while watching TV or on any moment when the TV is in Standby.
82