Audio Description
Switch On
Digital TV channels can broadcast special audio commentary describing what is happening on screen.
To be able to set the visually impaired audio and effects, you have to switch on Audio Description first.
Also, before you can switch on Audio Description, you have to switch on Accessibility in Setup.
With Audio Description, a narrator's commentary is added to the normal audio.
To switch on the commentary (if available)…
1 - While watching a TV channel, press OPTIONS.
2 - Select Accessibility > Audio Description and press OK. 3 - Select On and press OK.
You can check if an audio commentary is available.
In the Options menu, select Audio Language and look for an audio language marked with a .
Mixed Volume
You can mix the volume of the normal audio with the audio commentary.
To mix the volume…
1 - Press and press (left) for Setup.
2 - Select Accessibility > Audio Description > Mixed Volume and press OK.
3 - Use the arrows up and down to set the slider bar.
4 - Press OK to confirm.
5 - Press BACK repeatedly if necessary, to close the menu.
If an audio language with added audio commentary is available, you can also find this setting in OPTIONS > Accessibility > Mixed Volume.
Audio Effect
Some audio commentary can hold extra audio effects, like stereo or fading sound.
To switch on Audio effects (if available)… 1 - Press and press (left) for Setup.
2 - Select Accessibility > Audio Description > Audio Effects and press OK.
3 - Select On and press OK.
4 - Press BACK repeatedly if necessary, to close the menu.
Speech
The audio commentary can also hold subtitles for the words which are spoken.
To switch on these subtitles (if available) . . .
1 - Press and press (left) for Setup.
2 - Select Accessibility > Audio Description > Speech and press OK.
3 - Select Descriptive or Subtitles and press OK.
4 - Press BACK repeatedly if necessary, to close the menu.
25.8
Network
For more information, press the colour key Keywords and look up Network.
25.9
Installation Antenna/Cable
Update Channels
Automatic Channel Update
If you receive digital channels, you can set the TV to automatically update these channels.
Once a day, at 6 AM, the TV updates the channels and stores new channels. New channels are stored in the Channels List and are marked with a . Channels without a signal are removed. The TV must be in Standby to automatically update channels. You can switch off Auromatic Channel Update.
To switch off the automatic update… 1 - Press and press (left) Setup.
2 - Click Antenna/Cable Installation > Automatic Channel Update and click Off.
3 - Press BACK repeatedly if necessary, to close the menu.
When new channels are found or if channels are updated or removed, a message is shown at TV start up. To avoid this message to appear after every channel update, you can switch it off.
To switch off the message…
1 - Press and press (left) Setup.
2 - Click Antenna/Cable Installation > Channel Update Message and click Off.
3 - Press BACK repeatedly if necessary, to close the menu.
In certain countries, the Automatic channel update is done while watching TV or on any moment when the TV is in Standby.
Manual Channel Update
You can always start an channel update yourself.
To start a channel update manually… 1 - Press and press (left) Setup.
78
