3
Network
3.1
Connect to Network
Wireless Connection
What You Need
To connect the TV to the Internet wirelessly, you need a
Use a
Make the Connection
Wireless
To make a wireless connection…
1 - Press and press (left) Setup.
2 - Click Network and click Connect to Network. 3 - Click Wireless.
4 - In the list of found networks, click on your wireless network. If your network is not in the list because the network name is hidden (you switched off the SSID broadcast of the router), select Enter Name to enter the network name yourself.
5 - Depending on the type of router, enter your encryption key
-WEP, WPA or WPA2. If you entered the encryption key for this network before, you can click OK to make the connection immediately.
6 - A message will be shown when the connection is successful.
WPS
If your router has WPS, you can directly connect to the router without scanning for networks. If you have devices in your wireless network that use the WEP security encryption system, you cannot use WPS.
1 - Press HOME to open the Home menu.
2 - In the menu bar, click Apps and click Setup.
3 - Click Network and click Connect to Network.
4 - Click WPS.
5 - Go to the router, press the WPS button and return to the TV within 2 minutes.
6 - Click Connect to make the connection.
7 - A message will be shown when the connection is successful.
WPS with PIN Code
If your router has WPS with a PIN code, you can directly connect to the router without scanning for networks. If you have devices in your wireless network that use the WEP security encryption system, you cannot use WPS.
1 - Press HOME to open the Home menu.
2 - In the menu bar, click Apps and click Setup.
3 - Go to Network and click Connect to Network. 4 - Click WPS with PIN code.
5 - Write down the
7 - A message will be shown when the connection is successful.
Problems
Wireless network not found or distorted
•Microwave ovens, DECT phones or other
•Make sure that the firewalls in your network allow access to the TV's wireless connection.
•If the wireless network does not work properly in your home, try the wired network installation.
Internet does not work
•If the connection to the router is OK, check the router connection to the Internet.
The PC and Internet connection are slow
•Look in your wireless router's user manual for information on indoor range, transfer rate and other factors of signal quality.
•Use a
DHCP
•If the connection fails, you can check the DHCP (Dynamic Host Configuration Protocol) setting of the router. DHCP should be switched on.
Wired Connection
What You Need
To connect the TV to the Internet, you need a network router with a connection to the Internet. Use a
8
