Screen Off
If you only listen to music, you can switch off the TV screen to save energy.
To only switch off the TV screen… 1 - Press and click Eco Settings.
2 - Click Screen Off.
To switch the screen back on, press any key on the remote control.
Light Sensor
To save energy, the
To only switch off the TV screen…
1 - Press and click Eco Settings.
2 - Click Light Sensor. The icon is shown in front of Light Sensor when it is active.
Switch Off Timer
If the TV receives a TV signal but you don't press a key on the remote control during a 4 hour period, the TV switches of automatically to save energy. Also, if the TV does not receive a TV signal nor a remote control command for 10 minutes, the TV switches off automatically.
If you use the TV as a monitor or use a digital receiver to watch TV (a
To deactivate the Switch Off Timer …
1 - Press and click Eco Settings.
2 - Click Switch Off Timer. Click inside the slider bar to adjust the value. The value 0 (Off) deactivates the automatic switch off.
The icon is shown in front of Switch Off Timer when it is active.
25.7
Accessibility
Switch On
With Accessibility switched on, the TV is prepared for use for the deaf, hard of hearing, blind or partially sighted people.
Switch on
If you did not switch on Accessibility during the installation, you can still switch it on in Setup.
To switch on Accessibility…
1 - Press and press (left) for Setup.
2 - Select Accessibility and select Accessibility one step further. 3 - Select On and press OK.
4 - Press BACK repeatedly if necessary, to close the menu.
With Accessibility switched on, the option Accessibility is added in the Options menu.
Key Beep
Key Beep gives an audio feedback each time you press a key on the remote control. The volume of the beep is fixed.
To switch on Key Beep…
1 - While watching a TV channel, press OPTIONS, select Accessibility and press OK.
2 - Select Key Beep and select On.
If Accessibility does not appear in the Options menu, switch on Accessibility in Setup.
For more information, press Keywords and look up Accessibility.
Hard of Hearing
Some digital TV channels broadcast special audio and subtitles adapted for the hard of hearing or deaf people. With Hearing impaired switched on, the TV automatically switches to the adapted audio and subtitles, if available. Before you can switch on Hearing impaired, you have to switch on Accessibility.
Switch on
To switch on Hearing impaired…
1 - While watching a TV channel, press OPTIONS, select Accessibility and press OK.
2 - Select Hearing impaired, select On and press OK.
To check whether a hearing impaired audio language is available, press OPTIONS, select Audio language and look for an audio language marked with a .
If Accessibility does not appear in the Options menu, switch on Accessibility in Setup.
For more information, press Keywords and look up Accessibility.
77
