Philips M2540 Major Assemblies

M2540-92000-01 A M2540 Ultrasound System Field Service Manual Page 178

Parts: Major Assemblies

To learn about transducer parts, please see the M2540A Transducer Guide.

Be sure to specify the correct sub-assembly or component part number, as listed throughout this

section.

Some circuit boards, transducers, and OEM peripherals are available as exchange items (repaired

or refurbished), at reduced cost. Exchange item part numbers are different from original equip-

ment part numbers. See “Exchange Part Numbers” on page 200

When ordering any new or exchange part, be sure to include the system serial number and the

software revision prefix (for example, B.0). The serial number is on the system ID label, on the

rear of the cart. The ID label also identifies installed system options. Use the system Help file to

find software revision numbers, or run the RST application, and under the Info tab, click Sys-

tem. (See “System Information” on page 109.)

Major Assemblies

The following table lists the major assemblies of the M2540A, and the drawings that show them.

Table 13-1 Major Assemblies

Description Drawing and Page

PC Figure 13-1 on page 180

Power supply Figure 13-2 on page 183

e-box Figure 13-2 on page 183

Upper assembly Figure 13-5 on page 193

Lower assembly Figure13-3 on page 185

Lift column Figure 13-4 on page 190