M2540-92000-01 A M2540 Ultrasound System Field Service Manual Page 60
Installation: Assemble the System
•Peripherals should mount toward the rear of the system, with about one centimeter
between the lower peripheral and the inside edge of cart top.
➤Installing a VCR
1. Loosen the peripheral strap, and slide the VCR under it.
2. Connect the power cable, audio input cable, audio output cable, and S-video cable
to the VCR.
3. Connect the serial cable to the VCR, and screw it in place.
4. If another peripheral is part of the installation, place the VCR peripheral tray on the top of
the VCR.
5. Tighten the peripheral strap on top of the peripherals.
6. Turn on the VCR power switch.
7. Set the VCR switches to the following settings:
•Audio Out left switch: Mix
•Audio Out right switch: Norm
•Input: S-Video
•S-VHS: Auto
•Menu: Off
•Mode Lock: Off
8. Save the VCR manual and any other documentation from the shipping box.
➤Installing a Sony Color Printer
NOTE If a VCR is also part of the installation, install it with its tray before the printer.