♦Compatible with all ProntoEdit files.
♦Compatible with all RC5000 Setup files.
♦Compatible with Touch Screen Setup "large screen" files (screens will be truncated).
♦Compatible with all RAVedit files.
♦Compatible with all CHAD Edit files.
All Yamaha RAV−2000 users:
No new firmware upgrades have yet been released.
If you are using RAVedit v1.0:
♦Compatible with all RAVedit files.
♦Compatible with all ProntoEdit files.
♦Not compatible with ProntoProEdit files.
To use ProntoProEdit files you must download and install ProntoEdit v4.0, load the file you wish to use, then save as "BWOld Pronto Configuration". The file, if small enough, can now be used with RAVedit.
♦Compatible with all RC5000 Setup files.
♦Not compatible with Touch Screen Setup "large screen" files.
See above instructions for ProntoEdit, but instead download Touch Screen Setup v1.0.14. Screens will be truncated.
♦Compatible with all CHAD Edit files.
All Onkyo CHAD Edit users:
No new firmware upgrades have yet been released.
If you are using CHAD Edit v1.0.0:
♦Compatible with all RAVedit files.
♦Compatible with all ProntoEdit files.
♦Not compatible with ProntoProEdit files.
To use ProntoProEdit files you must download and install ProntoEdit v4.0, load the file you wish to use, then save as "BWOld Pronto Configuration". The file, if small enough, can now be used with RAVedit.
♦Compatible with all RC5000 Setup files.
♦Not compatible with Touch Screen Setup "large screen" files.
See above instructions for ProntoEdit, but instead download Touch Screen Setup v1.0.14. Screens will be truncated.
♦Compatible with all RAVedit files.
If your remote has the most recent firmware and your ProntoEdit version is also up−to−date, be aware that this problem can randomly occur after any CCF file download. To fix it, simply download the file again.
B1−07 Can I use Pronto NG .PCF files? How about .ICF and .NCF files?
The simple answer is: no! Philips Pronto NG and ProntoPro NG .PCF files are not compatible or exportable to the .CCF file format. However, you MAY be able to use some of their elements.
First, infrared hex codes from .PCF files may work correctly on regular Pronto remotes. But, since ProntoEdit NG has been known to slightly modify codes, don't be surprised if some don't work correctly, or at all.
Second, you should be able to borrow any .BMP graphics contained in a .PCF file. To do so, take the
RC: Philips Pronto & Marantz RC5000 Unofficial FAQ | 28 |
