+66is displayed as the level is increased
ordecreased.
5 Touchband then touch cor dto se-
lectthe desired frequency.
Touchcor duntil the desired frequency ap-
pearsin the display.
Low:4080100160 (Hz)
Mid:2005001k2k (Hz)
High:3.15k8k10k12.5k (Hz)
6 Touchband then touch cor dto se-
lectthe desired Q factor.
Touchcor duntil the desired Q factor ap-
pearsin the display.
2W1W1N2N
Note
Ifyou make adjustments, CUSTOM curve is up-
dated.
Adjusting bass and treble
Youcan adjust bass and treble settings.
!IfEQ-EX function has been selected and
onlywhen EQ-EX is turned on and
CUSTOMis selected as the equalizer
curve,you can adjust bassand treble set-
tings.(Refer to Compensating for equalizer
curves (EQ-EX) on page 72.)

Adjusting bass

Youcan adjust the cut-off frequency and the
basslevel.
!IfSFEQ has been set to FRONT1, bass ad-
justmentaffects only the rear output: front
outputcannot be adjusted. (Refer to Setting
thesound focus equalizer (SFEQ) on page
73.)
1 TouchA.MENU and AUDIO and then
touchBASS.
2 Touchcor dto select the desired fre-
quency.
Touchcor duntil the desired frequency ap-
pearsin the display.
4063100160(Hz)
3 Touchaor bto adjust the bass level.
Eachtime you touch aor bincreases or de-
creasesthe bass level. +6 6is displayed as
thelevel is increased or decreased.

Adjusting treble

Youcan adjust the cut-off frequency and the
treblelevel.
!IfSFEQ has been set to FRONT1 or
FRONT2,treble adjustment affects only the
frontoutput: rear output cannot be ad-
justed.(Refer to Setting the sound focus
equalizer(SFEQ) on page 73.)
1 TouchA.MENU and AUDIO and then
touchTREBLE.
2 Touchcor dto select the desired fre-
quency.
Touchcor duntil the desired frequency ap-
pearsin the display.
2.5k4k6.3k10k(Hz)
3 Touchaor bto adjust the treble level.
Eachtime you touch aor bincreases or de-
creasesthe treble level. +6 6is displayed as
thelevel is increased or decreased.
Adjusting loudness
Loudnesscompensates for deficiencies in the
low-and high-sound ranges at low volume.
Audio Adjustments
En
70
Section
15