3 Touchcor dto select an appropriate
settingfor polarity.
Eachtime you touch cor dswitches between
thefollowing polarity:
!BATTERYWhen the polarity of the con-
nectedlead is positive while the gear shift
isREVERSE (R) position
!GNDWhen the polarity of the connected
leadis negative while the gear shift is RE-
VERSE(R) position
Selecting the video of reardisplayWhenthe navigation video is displayed on
frontdisplay, you can select either showing
thenavigation video on rear display or the
videoof the selected source.
!Onlywhen a Pioneer navigation unit is con-
nectedto this unit, you can switch the
videoof rear display.
!Whenselecting SOURCE in REAR DISP,
whenthe selected source is an audio
source,nothing is displayed on rear dis-
play.
!Whenselecting SOURCE in REAR DISP,
nothingis displayed on rear display during
atraffic announcement interruption or a
newsprogram interruption.
1 TouchA.MENU and SETUP and then
touchREAR DISP.
2 Touchcor dto select the video on rear
display.
Touchcor duntil the desired video setting
appearsin the display.
!SOURCEDisplay the video of the selected
sourceon rear display
!NAVIDisplay the navigation video on rear
display
Setting the automatic openfunctionToprevent the display from hitting the shift
leverof an automatic vehicle when it is in P
(park)position, or when you do notwish the
displayto open/close automatically, you can
setthe automatic open function in the manual
mode.
Furthermore,to adjust the LCD panel slide po-
sition,you can turn the set back on oroff.
1 TouchA.MENU and SETUP and then
touchFLAP SET.
2 Touchato turn the set back on, and
theLCD panel slides to the back.
#Toturn the set back off, touch band the LCD
panelslides to the front.
3 Touchcor dto select the display to
open/closeautomatically or manually.
Touchcto select MANUAL, and you have to
pressOPEN/CLOSE to open/close the display.
Touchdto select AUTO, and the display auto-
maticallyopens/closes when power to this
unitis turned on.
Setting the clockUsethese instructions to set the clock.
1 TouchA.MENU and SETUP and then
touchCLOCK ADJ.
2 TouchOFF to turn the clock display on.
ONwill appear in the display instead of OFF.
Clockdisplay is now on.
#Youcan also turn the clock display on or off by
pressingFLIP DOWN/CLOCK when the LCD
panelis closed.
#Toturn the clock display off, touch ON.
Other Functions
En 91
Section
19