Troubleshooting

Common

Symptom Cause Action(See)
Powerdoesnt turn on.
Theunit doesnt operate.
Leadsand connectors are incor-
rectlyconnected.
Confirmonce more that all connections are
correct.
Thefuse is blown. Rectifythe reason for the fuse blowing, then
replacethe fuse. Be very sure to install the
correctfuse with the same rate.
Noiseand other factors are causing
thebuilt-in microprocessor to oper-
ateincorrectly.
PressRESET. (Page10)
Operationwith the remote con-
trolisnt possible.
Theunit does not operate cor-
rectlyeven when the appropriate
remotecontrol buttons are
pressed.
Theremote control operation mode
isincorrect.
Switchto the correct remote control mode.
(Page15)
Theremote control code is incor-
rect.
Makesure the remote control selection
switchsetting and code type setting are the
same.(Page 85)
Batterypower is low. Loadnew battery. (Page 11)
Someoperations are prohibited
withcertain discs.
Checkusing another disc.
Playbackis not possible. Thedisc is dirty. Cleandisc. (Page 97)
Theloaded disc is a type this unit
cannotplay.
Checkwhat type the disc is.
Noncompatible video system disc
isloaded.
Changeto a disc compatible to your video
system.
Nosounds are heard.
Thevolume level will not rise.
Cablesare not connected correctly. Connectthe cables correctly.
Theunit is performing still, slow mo-
tionor frame-by-frame playback.
Thereis no sound during still, slow motion or
frame-by-frameplayback.
Theresno picture. Theparking brake cord is not con-
nected.
Connecta parking brake cord, and apply the
parkingbrake.
Theparking brake is not applied. Connecta parking brake cord, and apply the
parkingbrake.
Theicon isdisplayed, and op-
erationis not possible.
Theoperation is prohibited for the
disc.
Thisoperation is not possible.
Theoperation is not compatible
withthe discs organization.
Thisoperation is not possible.
Thepicture stops (pauses) and
theunit cannot be operated.
Readingof data has become impos-
sibleduring playback.
Afterpressing gonce, start playback once
more.
Theresno sound.
Volumelevel is low.
Thevolume level is low. Adjustthe volume level.
Theattenuator is on. Turnthe attenuator off.
Theresaudio and video skip-
ping.
Thisunit is not firmly secured. Securethis unit firmly.
Thepicture is stretched, the as-
pectis incorrect.
Theaspect setting is incorrect for
thedisplay.
Selectthe appropriate setting for your display.
(Page84)
Additional Information
En
94
Appendix