3 TouchPANORAMA and then touch dto
turnthe Panorama control on.
#Toturn the Panorama control off, touch c.
4 TouchDIMENSION and then touch cor
dtoadjust front/surround speaker bal-
ance.
Eachtime you touch cor dmoves the sound
towardsthe front or the surrounds.
+33is displayed as the front/surround
speakerbalance moves from front to sur-
rounds.
5 TouchCENTER WIDTH and then touch c
ordto adjust the center image.
Eachtime you touch cor dgradually spreads
thecenter channel sound into the front left
andright speakers over a range 07.
3isthe default and its recommended for
mostrecordings. 0places all center sound in
thecenter speaker. 7places all center sound
equallyin the left/right speakers.
Setting the speaker setting
Youneed to make with/without (or yes/no) and
size(bass reproducing capacity) selection/ad-
justmentsdepending on the installed speak-
ers.The size needs to be set to LARGE (large)
ifthe speaker is capable of reproducing
soundsof about 100 Hz or below. Otherwise
selectSMALL (small).
!Lowfrequency range is not output if the
subwooferis set to OFF and the front and
rearspeakers set to SMALL or OFF.
!Itis imperative that non-installed speakers
beset to OFF.
!Setthe front or rear speaker to LARGE if
thespeaker is capable of reproducing bass
content,or if no subwoofer is installed.
1 TouchA.MENU and AUDIO and then
touchSound Setting.
2 TouchSP SET.
3 Touchthe speaker to be adjusted.
4 Touchaor bto select the correct size
forthe selected speaker.
Eachtime you touch aor bselects the size in
thefollowing order:
OFF(off)SMALL (small)LARGE (large)
#Youcannot select OFF, when the front speak-
ershave been selected.
#Youcan turn ON or OFF, when the subwoofer
hasbeen selected.

Correctingthe subwoofersphase

Iftr ying to boost the bass output of the sub-
wooferdoesnt do much or rather makes you
feelthat the bass gets more murky, this may
indicatethat the subwoofer s output and bass
contentyou hear over other speakers cancel
eachother out. To remove this problem, try
changingthe phase setting for the subwoofer.
1 TouchA.MENU and AUDIO and then
touchSound Setting.
2 TouchSP SET.
3 Touchthe subwoofer.
4 Touchato turn subwoofer output on.
#Toturn subwoofer output off, touch b.
5 Touchcor dto select the phase of sub-
wooferoutput.
Touchdto select normal phase and
NORMALappears in the display. Touch cto
selectreverse phase and REVERSE appears in
thedisplay.
Audio Adjustments
En 77
Section
15
AudioAdjustments