1 Setthe remote control selection switch
onthe left side of the remote control to
theappropriate position with a pen tip or
otherpointed instrument .
!Ifyou select AVH mode, there isno need to
takethe following procedure.
!Ifyou select A/Bmode, take the following
procedureand change the code type to the
appropriatetype.
2 Press7 and 0 on the remote control si-
multaneouslyto change the code type.
Initially,the code type is set to A. Each time
youpress 7and 0simultaneously on the re-
motecontrol the code type switches between
AandB.
Setting up the DVD
player
En 87
Section
16
Settingup the DVD player