2 Touchato turn back-up camera setting
on.
#Toturn back-up camera setting off, touch b.
3 Touchcor dto select an appropriate
settingfor polarity.
Eachtime you touch cor dswitches between
thefollowing polarity:
!BATTERYWhen the polarity of the con-
nectedlead is positive while the gear shift
isREVERSE (R) position
!GNDWhen the polarity of the connected
leadis negative while the gear shift is RE-
VERSE(R) position
Setting the clock
Usethese instructions to set the clock.
!Whenthis unit is turned on,time is dis-
playedon the entertainment clock only.
(Referto Switching the background display
onpage 94.)
1 TouchA.MENU and SETUP and then
touchCLOCK ADJUST.
2 Touchcor dto select the segment of
theclock display you wish to set.
Eachtime you touch cor dwill select one
segmentof the clock display:
HourMinute
Asyou select segments of the clock display
thesegment selected will be highlighted.
3 Touchaor bto set the clock.
Eachtime you touch awill increase the se-
lectedhour or minute. Each time you touch b
willdecrease the selected hour or minute.
Notes
!Youcan match the clock to a time signal by
touchingJUST.
Ifthe minute is 0029, the minutes are
roundeddown. (e.g., 10:18 becomes
10:00.)
Ifthe minute is 3059, the minutes are
roundedup. (e.g., 10:36 becomes 11:00.)
!Youcan display the clock for eight seconds by
pressingFLIP DOWN/CLOCK when the LCD
panelis closed.
!Evenwhen the sources are off, the clock dis-
playappears on the display.
Setting the automatic openfunction
Toprevent the display from hitting the shift
leverof an automatic vehicle when it is in P
(park)position, or when you do notwish the
displayto open/close automatically, you can
setthe automatic open function in the manual
mode.
1 TouchA.MENU and SETUP and then
touchAUTO FLAP.
2 Toucheither of the following touch
panelkeys to select the display to open/
closeautomatically or manually.
!AUTOThe LCD panel will be opened or
closedautomatically with the turning of the
ignitionswitch on or off
!MANUALYou have to press
OPEN/CLOSEto open/close the LCD
panel
Other Functions
En
92
Section
18