Listening to the radio
1
2
3
4
5
7
6
Theseare the basic steps necessar y to operate
theradio. More advanced tuner operation is
explainedstarting on the next page.
1Sourceicon
Showswhat the source has been selected.
2Bandindicator
Showswhich band the radio is tuned to, AM
orFM.
3Presetnumber indicator
Showswhat preset has been selected.
4Frequencyindicator
Showsto which frequency the tuner is
tuned.
5Presetlist display
Showsthe preset list.
6Stereo(5) indicator
Showsthat the frequency selected is being
broadcastin stereo.
7LOCindicator
Showswhen local seek tuning is on.
1 Touchthe source icon and then touch
TUNERto select the tuner.
#Whenthe source icon is not displayed, you
candisplay it by touching the screen.
2 Touchthe screen to display the touch
panelkeys.
3 TouchBAND to select a band.
TouchBAND repeatedly until the desired band
isdisplayed, FM1,FM2,FM3 for FM or AM.
4 Toperform manual tuning, touch cor
dshortly.
Thefrequencies move up or down step by
step.
#Youcan also perform manual tuning by mov-
ingthe joystick left or right.
5 Toperform seek tuning, keep touching
cordfor about one second and release.
Thetuner will scan the frequencies untila
broadcaststrong enough for good reception is
found.
#Youcan cancel seek tuning by touching either
cordshortly.
#Ifyou keep touching cor dyou can skip
broadcastingstations. Seek tuning starts as soon
asyou release the keys.
#Youcan also perform seek tuning by holding
thejoystick left or right.
Note
Ifyou do not use the touch panel keys for 30 sec-
onds,they will be hidden automatically.
Tuner
En
28
Section
05