Adjusting the LCD panelslide position
Toadjust the LCD panel slide position, you can
turnthe set back on or off.
1 TouchA.MENU and SETUP and then
touchFLAP SET BACK.
2 Touchato turn the set back on, and
theLCD panel slides to the back.
#Toturn the set back off, touch band the LCD
panelslides to the front.
Setting the video of reardisplay
Youcan select either showing the same
sourceas the front display or showing the
videosource on rear display independently.
!Whenselecting FRONT SOURCE in
REARMODE, when the selected source is
anaudio source, nothing is displayed on
reardisplay.
!Whenselecting FRONT SOURCE in
REARMODE, audio is not output from
REARMONITOR OUT.
1 TouchA.MENU and SETUP and then
touchREAR MODE.
2 Toucheither of the following touch
panelkeys to select thevideo on rear dis-
play.
!FRONTSOURCE Display the same source
asthe front display
!SEPARATEDisplay the video source on
reardisplay independently of front dis-
play
Displaying the navigationvideo on rear display
Whenthe navigation video is displayed on
frontdisplay, you can select either showing
thenavigation video on rear display or the
videoof the selected source.
!Onlywhen a Pioneer navigation unit is con-
nectedto this unit, you can operate this
function.
1 TouchA.MENU and SETUP and then
touchNEXT.
2 TouchREAR NAVI MAP.
3 Touchato display the navigation
videoon rear display.
#Touchbto display the video of the selected
sourceon rear display.
Using the AUX source
AnIP-BUS-RCA Interconnector such as the
CD-RB20/CD-RB10(sold separately) lets you
connectthis unit to auxiliar y equipment fea-
turingRCA output. For more details, refer to
theIP-BUS-RCA Interconnector owners man-
ual.

Selecting AUX as the source

%Touchthe source icon and then touch
AUXto select AUX as the source.
#Whenthe source icon is not displayed, you
candisplay it by touching the screen.
#Ifthe auxiliary setting is not turned on, AUX
cannotbe selected. For more details, see Switch-
ingthe auxiliary setting on page 88.
Other Functions
En 93
Section
18
OtherFunctions