Symptom Cause Action(See)
Switchingthe viewing angle is
notpossible.
TheDVD playing does not feature
scenesshot from multiple angles.
Youcannot switch between multiple angles if
theDVD does not feature scenes recorded
frommultiple angles.
Youare trying to switch to multiple
angleviewing of a scene that is not
recordedfrom multiple angles.
Switchbetween multiple angles when watch-
ingscenes recorded from multiple angles.
Thepicture is extremely unclear/
distortedand dark during play-
back.
Thedisc features a signal to prohibit
copying.(Some discs may have
this.)
Sincethis unit is compatible with the copy
guardanalog copy protect system, when play-
inga disc that has a signal prohibiting copy-
ing,the picture may suffer from horizontal
stripesor other imperfections when viewed
onsome displays. This does not mean this
unitis malfunctioning.

Problemsduring Video CD playback

Symptom Cause Action(See)
ThePBC (playback control)
menudisplay cannot be called
up.
TheVideo CD playing does not fea-
turePBC.
Thisoperation is not possible with Video CDs
notfeaturing PBC.
PBCis turned off. TurnPBC on. (Page 44, Page48)
Repeatplay and track/time
searchare not possible.
PBCis turned on. TurnPBC off. (Page44, Page 48)
Error messages

Whenproblems occur with disc playback, an error message appears on the display. Refer to the

tablebelow to identify the problem, then take the suggested corrective action. If the error persists,

contactyour dealer or your nearest PIONEERService Center.

Message Cause Action(See)
ERROR-02 Dirtydisc Cleandisc.
Scratcheddisc Replacedisc.
ERROR-05 Electricalor mechanical PressRESET.
DIFFERENTREGION DISC (RE-
GIONERR)
Thedisc does not have the same re-
gionnumber as this unit
Replacethe DVD video with one bearing the
correctregion number.
NONPLAYABLEDISC (NON-
PLAY)
Thistype of disc cannot be played
bythis unit
Replacethe disc with one this unit can play.
Thedisc is loaded upside down Checkthat the disc is loaded correctly.
THERMALPROTECTION IN
MOTION(TEMP)
Thetemperature of this unit is out-
sideof the normal operating range
Waituntil the units temperature returns to
withinnormal operating limits.
Additional Information
En
98
Appendix