Adjusting initial settings
1
Initialsettings lets you per form initial set up of
differentsettings for this unit.
1Functiondisplay
Showsthe function names.
1 Touchthe source icon and then touch
OFFto turn this unit off.
#Whenthe source icon is not displayed, you
candisplay it by touching the screen.
2 TouchA.MENU and then touch INITIAL
todisplay the function names.
Thefunction names are displayed and oper-
ableones are highlighted.
#WhenA.MENU is not displayed, you can dis-
playit by touching the screen.
#Youcan also display MENU by clicking the
joystick.
#Togo to the next group of function names,
touchNEXT.
#Toreturn to the previous group of function
names,touch PREV.
#Toreturn to the previous display, touch BACK.
#Toreturn to the display of each source, touch
ESC.
Switching the warning tone
Ifthe front panel is not detached fromthe
headunit within five seconds of turning off the
ignition,a warning tone will sound. You can
turnoff the warning tone.
1 TouchA.MENU and INITIAL and then
touchDETACH WARNING.
2 Touchato turn warning tone on.
#Toturn warning tone off, touch b.
Switching the auxiliary setting
Itis possible to use auxiliar y equipment with
thisunit. Activate the auxiliar y setting when
usingauxiliary equipment connectedto this
unit.
1 TouchA.MENU and INITIAL and then
touchAUX.
2 Touchato turn auxiliary setting on.
#Toturn auxiliary setting off, touch b.
Correcting distorted sound
Youcan minimize distortion likely caused by
theequalizer cur ve settings.
Settingan equalizer level high can cause dis-
tortion.If high sound is crippled ordistorted,
tryswitching to LOW. Normally, leave the set-
tingat HIGH to ensure quality sound.
1 TouchA.MENU and INITIAL and then
touchDIGITAL ATT.
2 Toucheither of the following touch
panelkeys to select the digital attenuator
setting.
!HIGHHigh quality sound
!LOWMinimize distortion sound
Initial Settings
En
88
Section
17