Pitney Bowes B702 manual Quick Reference Guide, Specifications Equipment, Material

1 • Introduction

The Quick Reference Guide

Don't like reading manuals? Try the

Quick Reference Guide supplied with your meter. It's lo-

cated in the ribbon compartment just above the cassette. It contains condensed

instructions for most of the topics covered in this book.

Specifications Equipment

Size: 11.75"L x 9.75"W x 7"H in. (30 cm x 25 cm x 18 cm)

Weight: 17.6 lbs. (8 kg), approximate

Power Requirements: 120 VAC, 60 Hz, 3A

Operating Temperature: 40°F (4°C) to 109°F (43°C)

Average Throughput: 30 envelopes per minute maximum. Actual throughput will vary, depending on the material used and the skill of the operator.

Ribbon Life: 1,200 impressions maximum; this will vary, de- pending on the number of ads printed.

Material

Minimum Size: 3" x 3" (76 mm x 76 mm)

Maximum Size: 10" x 13.5" (250 x 340 mm)

Minimum Thickness: 0.007" (0.2 mm)

Maximum Thickness: .24 in. (6 mm)

IMPORTANT! For best results, make sure that your material (envelopes, postcards) conforms fully to these specifi cations. We do not recommend textured or rough-surfaced papers because they may cause poor print quality. Mail that presents an uneven surface to the print mechanism may also cause poor print qual- ity. (Tapping mail contents to the top right envelope corner may help.) Use tape sheets to apply postage to rough surfaced or oversize mailpieces.

1-4 SV60941 Rev. B