Pitney Bowes B702 Performing an Inspection on Your Meter, Obtaining the Current Meter Access Code

5 • Refilling Your Meter

Performing an Inspection on Your Meter

Postal regulations require a meter holder to contact the man- ufacturer periodically to add postage or perform an inspec- tion. If you do not add postage within a 90-day period, your meter will begin flashing “Insp. Due” but will still allow you to run postage.

If you do not add postage or perform an inspection within the next 30 days, your meter will flash “Insp. Req.” and stop printing postage.

You can satisfy this requirement by calling our automated system at 1-800-243-7800and adding postage or if you do not need postage, by performing an inspection. Below are the steps to perform an inspection:

Obtaining the Current Meter Access Code

To obtain your meter’s current access code:

1.Press the Refill button. Your default reset amount will display.

2.Press the number 5 and then press Enter.

3.Press the Enter button again.

4.Your current access code displays. Write this number down.

5.Press the Enter button again.

5-10 SV60941 Rev. B