4 • Setting Up the Meter
Menu 9:
Set Default
Inscription
(B700 Only)
Menu 10:
Set Account
Default
(B700 Only)
NOTE: This menu item is not available when the password
The default inscription is automatically selected when you first turn the meter on and after it has been inactive for a pe- riod of time. You can change the default as follows:
1.The display prompts “Set Inscrpt Default?”
2.Press Yes.
3.The display prompts “Enter Insc Number.”
4.Key in the code number of the default inscription using the number keys and press Enter. (If the number you en- ter isn't
NOTE: Inscriptions are options purchased at the time of your initial order or afterwards from the PB Supply Line™. See the Appendix for a list of available inscriptions and their code numbers.
5.The display prompts “Inscrpt Set” and the meter goes to the next item in the setup menu.
The meter selects the default account automatically when you first turn it on and after it's been inactive for a while. You can change the default account as follows:
1.The display prompts “Set Account Default?”
2.Press Yes.
3.The display shows the current default account name.
4.Press No repeatedly to cycle through the available ac- count names or key in the account ID number and press Enter. (Account ID numbers range from 1 to 10. If you have the optional Electronic Interface Unit [“Datalink”], they range from 1 to 100.)
NOTE: If the meter can't accept the number you enter, it will prompt “Error” and return you to the “Set Account Default?” prompt.
5.When you’ve selected the account name you want, press Enter.
6.The meter prompts “Account Set” and moves to the next item in the setup menu.
SV60941 Rev. B |
