Pitney Bowes B702 manual Moistener B700 Only, Filling Moistener, Using the Moistener

8 • Supplies and Options

Moistener (B700 Only) (continued)

NOTE: You can use tap water in the moist- ener. But we strongly recommend that, for best results, you use E-Z Seal® instead. It prolongs the life of the moistener brush and reduces maintenance requirements.

Filling Moistener

1.Pour E-Z Seal® solu- tion into the fill hole of

the moistener brush assembly.

2.Fill until the solution level reaches the top

of the sight glass. DO NOT overfill.

Sight Glass

Using the Moistener

1. Select the postage value you want, just as you normally would.

2.Open the envelope flap and feed it under the

moistener brush as- sembly as shown.

3.Guide the envelope up against the rear wall and to the right until its lead edge reaches the trip mark on the meter's deck.

4.The meter will then convey the envelope through the printer and into the stacker.

5.To fully seal some flaps, you may have to compress the mailpiece by hand after metering.

8-4 SV60941 Rev. B