Supplies and Options • 8
Advertising Slogan Cartridge (continued)
Moistener
(B700 Only)
3.To select an ad, press the Ad key repeatedly until you see the ad name you want. Press Enter to confirm your selection. The meter's display then shows the postal amount.
When the meter is in the Ad Mode, you can also choose an ad by typing its number on the meter's keypad
and pressing Enter. If an ad isn't available, the meter prompts “No Ad.”
NOTE: Ads are not available for use if you remove the slo- gan cartridge from its well
The moistener is an option designed to moisten and help seal envelopes as they feed into the postage meter. The in- structions below tell you how to attach, fill, use and maintain your moistener.
Attaching the Moistener
1. Place the moist-
ener assembly to the left of the
meter as shown at the right.
2. Slide the moisten- er to the right up against the meter. Align the pie-
shaped back wall of the moistener
with the smaller
areas are shaded
in the accompanying figure.
3.When the blue lock lever snaps up level with the meter deck, the moistener is fully locked into position.
SV60941 Rev. B |
