Supplies and Options • 8
Moistener (B700 Only) (continued)
Bypassing the Moistener
Keep the envelope flap closed as you feed it over the moist- ener brush (that is, on top of the brush). See figure below, right.
USE | BYPASS |
Maintaining the Moistener
1.Using
maintenance required. See page
2. Periodically remove the wick assembly and wipe excess envelope glue off the deck with a damp sponge or paper towel.
3. To remove the wick assembly, lift it straight up and out of the moistener as shown in
the accompanying illustration.
4.If the wick gets dirty, replace the entire wick assembly with a new one. Remove it as described in step 3 above; install the new one as shown. Make sure the new wick assembly is all the way down against the deck.
SV60941 Rev. B |
