Pitney Bowes B702 manual Adjusting the Stacker

Models: B702

1 96
Download 96 pages 22.31 Kb
Page 26
Image 26

Using the Meter • 3

Adjusting the Stacker

Slide the stacker into posi- tion up against the meter as shown. This position is good for envelopes up to #10. If you're running lon- ger envelopes, move the stacker to the right as nec- essary to accommodate them.

Checking

Postage Funds

Available

Checking the Date

Advancing the Date

1.Press $ Available to display the postage funds on hand.

2.Press $ Used to display the amount of postage already used.

3.Press C (Clear) to return to the default postage display.

Press +Date to check the date. The display shows the date exactly as it will be printed. Any omitted parts of the date ap- pear as dashes. (See Omitting the Date below.)

1.To advance the date, press the +Date key again. This advances the date by one day. Each time you press the +Date key, the date advances by one more day. You can advance the date of submission up to 30 days. If you attempt to advance the date more than this, the meter prompts: “30 Days Max” after you press Enter and re- turns to the current date setting.

You can also advance the date by keying in a num- ber—from 1 to 30—and pressing Enter while the meter is in the date setting mode. For example, if you press 6 and Enter, the date advances by six days and the display returns to the postage amount .

2.To return to the current date, press the C key while the meter is in the date mode and press Enter. The display returns to the postage amount.

SV60941 Rev. B

3-3

Page 26
Image 26
Pitney Bowes B702 manual Adjusting the Stacker