Pitney Bowes DM800i Series manual Using Confirmation Services Before Printing Postage

4 • Running Mail

Using

Confirmation

Services Before

Printing Postage

Adding Services or Making Changes

•If you already have postage on the mail and then decide you want to add a service, follow the instructions here for Adding Confirmation Ser- vices After Printing Postage.

•If you need to add more postage to cover the confirmation services, refer to the section, Add Postage and/or Change the Date in this chap- ter.

•If you realize you have put the wrong barcode on a piece of mail or package, you can change it as long as you have not sent the records to Pitney Bowes. Follow the instructions here for Editing, Deleting or Sending Confirmation Services Records.

USPS Confirmation Services are available when you are in the Attached Scale mode, or Manual Weight Entry mode. Refer to “Selecting the Post- age Mode and Running the Mail” in this chapter for more information.

The following procedure is based on using a Priority class and the E-Del Con service. Your procedure may vary slightly depending on your class and service.

1.Place the piece of mail or package on the scale.

2.Press the Class key.

3.Select the class, for example, Priority.

4.Select the service, for example, E-Del Con. As soon as you select the service, a check mark appears in front of it.

5.Press the Enter key.

6.At this point, you are prompted to enter the 5-digit destination ZIP Code. Use the numeric keyboard to enter the code.

7.Press the Enter key and the “Barcode” screen appears.

8.If this is the first time you are entering a confirmation service, the screen is blank and you need to enter the entire barcode value. If you have a barcode scanner, you can scan in the number.

a.If you have used the confirmation service before, the next barcode value (in the series of barcode labels) appears, minus the last digit.

b.If you have used all of the labels in a series of barcode labels, make sure you start with the top label with the lowest last 4-digits and not the bottom label with the highest last 4-digits. If you have a barcode scanner, you can scan in the number.

9.If you are using a barcode scanner and have set up your system to automatically enter the barcode value (see Setting Auto-Enterin Chap- ter 5 in this guide), go to step 10.

If you type in the barcode value, enter the last digit of the number from the label you will use. Then press the Enter key to accept the barcode value and the system returns to the main screen (“Attached Scale Mode” appears).

NOTE: Make sure the barcode on the label matches the barcode value you just entered in the system.

10.Press the Tape key to print a tape. To print postage on a piece of mail, place it on the feeder and press the Start key.

11.You are prompted to apply the barcode label to the package. Apply the barcode to the package.

4-24 SV61162 Rev. D