Pitney Bowes DM800i Series manual Select My Phone #, Select Dialing Type

DM800i™Series Digital Mailing System Operating Guide

Phone/Network

Set Up:

Secondary PB #

Phone/Network

Set Up: My

Phone #

Phone/Network

Set Up: Dialing

Type

Phone/Network

Set Up: Modem

Type

This feature may be offered as a standard or optional feature and is not available on all Pitney Bowes solutions. Please contact your local account representative to determine if this option is accessible on your system.

Use this option to enter a secondary or alternative Pitney Bowes phone number to dial if the first or primary number is busy.

1.Press the Menu key on the control center. Select Set Up from the main screen, then select Phone/Network Set Up.

2.Select Secondary PB #. This number is supplied by your Pitney

Bowes representative.

3.Use the numeric keypad to enter the phone number you need to dial to perform add postage.

4.Press the Enter key.

Use this option to enter your local phone number (the number to which your mailing system is connected).

1.Press the Menu key on the control center. Select Set Up from the main screen, then select Phone/Network Set Up.

2.Select My Phone #.

3.Use the numeric keypad to enter your local phone number. Be sure and include the area code with your number. Also, use only digits and do not include spaces or dashes.

4.Press the Enter key.

This feature may be offered as a standard or optional feature and is not available on all Pitney Bowes solutions. Please contact your local account representative to determine if this option is accessible on your system.

Use this option to set the modem to tone or pulse dialing.

1.Press the Menu key on the control center. Select Set Up from the main screen, then select Phone/Network Set Up.

2.Select Dialing Type.

3.Use the right arrow key to toggle between tone or pulse dialing.

4.Press the Clear key or the left arrow to exit.

Use this option to select the modem type: USB, Serial, or Internal.

1.Press the Menu key on the control center. Select Set Up from the main screen, then select Phone/Network Set Up.

2.Select Modem Type and the "Select Modem Type" screen appears.

3.Select the appropriate modem type (USB, Serial, or Internal). The Phone/Network Set Up screen reappears.

4.In order for this change to take effect you must restart your system. Use the On/Off switch located on the base of your machine to restart your system (see Mailing System Exterior section in Chapter 2 of this guide for the location of the On/Off switch).

SV61162 Rev. D 5-17