Precor 303135-111 manual Threading the Console Cables, To thread the console cables

Assembling the AMT 29

Threading the Console Cables

Before you begin this procedure, make sure that you have retrieved the following parts from the console package:

Ethernet (CAT 5) coupler and cable (models with P80 consoles only)

Television coupler and cable (models with P80 consoles or Personal Video Systems only)

Console power cable (models with P80 consoles or Personal Video Systems only)

Important: Be absolutely certain that all cables pass through all of the cable clips. Do not allow any of the cables to hang near any moving parts.

To thread the console cables:

Important: If you are installing console power and television cables in the following step, pass the console power cable through the opening first, followed by the television cable. Pass the remaining cables through in order of connector size.

1.Pass the ends of all cables through the opening in the top of the cable channel above the jack plate, then slide the cables into the guides in the channel.

Figure 14: Cable routing through the lower cable channel

2.Remove the nut from the outward end of the television cable coupler.