Precor 303135-111 manual Positioning the Handlebars, To position the handlebars for use

34 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers

Positioning the Handlebars

To avoid damage in shipment, the ATM is packed with its handlebars reversed. Two ³₈-inch x 1¹₄-inch set screws are loosely threaded into the screw holes on each handlebar. The plastic boots that will cover the screw holes are positioned just above them on the handlebars.

To position the handlebars for use:

1.Remove the two set screws from one handlebar.

Figure 19: Handlebar set screw removal