Precor 303135-111 manual Hardware Kit not to scale, Fasteners

18Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers

Hardware Kit (not to scale)

The hardware kit shipped with this equipment contains the fasteners and other hardware components shown in the following table. Before you begin assembly, make sure that your hardware kit is complete. If not, please contact Precor Customer Support.

Fasteners	Quantity
Nylon lock nuts (⁵₁₆-inch)	6
Hex head bolts	4
(⁵₁₆-inch x 1-inch)
Hex head bolts	6
(⁵₁₆-inch x 3¹₂-inch)
Bolt sleeve (⁵₁₆-inch)	2
Flat washers (⁵₁₆-inch)	6
Self-tapping screw (#10 x	6
1¹₄)
Flat head hex drive	5
screws (¹₄-inch x ⁵₈-inch)
End caps	2