Maintenance | 61 |
Changing the Belt (Newer Model AMT Only)
The newer model AMT uses belts to provide motion. These belts eventually wear and must be replaced.
When the belt stride count reaches 90 million, the message BELTS MUST BE CHANGED SOON scrolls on the Welcome screen. While this message appears, the AMT operates normally.
Important: If this message displays on your AMT, please contact Precor Customer Support for assistance.
When the belt stride count reaches 100 million (and the belt has not been changed), the message BELTS CHANGE REQUIRED scrolls continuously on the Welcome screen. The input keys are not functional and the user cannot enter values or begin a workout until the belts are changed. Please contact Precor Customer Support to schedule a belt change.
Storing the Chest Strap
If you purchased the optional heart rate chest strap, store it in a place where it remains free of dust and dirt (for example, in a closet or drawer). Be sure to protect the chest strap from extremes in temperature. Do not store it in a place that may be exposed to temperatures below 32° F (0° C).
To clean the chest strap, use a sponge or soft cloth dampened in mild soap and water. Dry the surface thoroughly with a clean towel.
Moving the Equipment
The equipment is very heavy. If you plan to move it to a new location, obtain the help of an adult assistant and use proper lifting techniques. If the equipment includes roller wheels on one end, use the wheels to reduce the load on yourself and your assistant.
To move the AMT:
1.Disconnect, unplug, and remove all external connections (television, Ethernet, and power).
2.Lift the rear platform molding to remove it.
3.Lift the rear foot supports to tip the AMT forward onto its roller wheels.
4.Push the AMT into its new location.
5.Lower the rear foot supports to the floor, then reattach the rear platform molding.
