Precharger and Transfer/Separator Charger
12.Loosen the precharger thumbscrew, and transfer/separator charger thumbscrew, and pull the chargers out of the printer.
3
2 | 2 | |
1 | ||
|
Legend:
1)Transfer/Separator Charger
2)Thumbscrews
3)Precharger
13.Place the chargers on a flat, clean work surface.
14.Using the brush cleaner and the wire cleaner (listed on page 78), remove the dust and dirt on the wires. When dirt is caked on, the wires feel gritty. When clean, the wires feel smooth.
15.Install the chargers. Fasten the charger screws to secure them.
109
