Chapter | 2 | Setting The Stacker Page Length |
|
|
|
|
|
|
11.0 | 5.3 |
|
|
11.5 | 5.0 |
|
|
12.0 | 4.8 |
|
|
NOTE: Normal Mode supports up to 28 lb. bond (105 g/m2). Heavy Mode must be used for media weights greater than 34 lb. bond (128 g/m2). Some media that are 28 lb. bond (105 g/ m2) and higher require Heavy Mode for reliable stacking.
Setting The Stacker Page Length
Set the stacker page length to match the actual page length. On the side of the stacker, locate the adjustment knob and the window containing a measuring gauge (a pointer with a scale). Rotate the knob until the pointer matches the page length being used. See the illustration on page 40.
NOTE: If the printer page length does not match the stacker page length, the timing of the stacker swinger arm will be incorrect, resulting in a folding error.
Set the printer page length by following the instructions for changing printer configurations. Refer to the User’s Manual for details.
42
