Chapter 4 General Cleaning
114
11. Remove the two screws that secure the lamp duct filter unit to
the fuser, then remove the lamp duct filter unit and the foam
gasket.
Legend:
1) Foam Gasket
2) Screw (4)
3) Filter Holding Plate
4) Lamp Filter (Air Filter)
5) Lamp Duct
12. Remove the two screws that secure the filter holding plate to
the lamp duct filter unit, then remove the lamp filter.
13. Vacuum the lamp filter, then install it.
14. Vacuum any paper dust from the printer frame.
15. Install the fuser, making sure that the guide pins in the sc rew
bracket align with the holes in the side frame of the printer .
12
3
4
5