Printronix L5535 manual Custom Tray Width Optional Procedure

Chapter 2 Loading Paper

If the cut sheet trays are of different sizes, and Tray Linking is enabled, the printer will not switch to the alternate tray when the first tray runs out of paper, nor will it display the usual “CUT-SHEET PAPER EMPTY” message on the LCD. Instead, the printer stops printing and displays the message “TRAY MISMATCH.”

To clear this message, either add paper to the active tray, or insert a matching tray in the alternate tray position. Then, press CLEAR on the control panel.

Custom Tray Width (Optional Procedure)

If your printer is equipped with the cut sheet paper feed option, it is possible to override the standard cut sheet paper tray widths. This feature is called Custom Tray Width. The standard cut sheet paper tray sizes are listed in the table on page 35. Using Custom Tray Width and specially-modified paper trays, it is possible to use nonstandard paper stock that is wider or narrower than the standard paper widths. You can use nonstandard width paper either in the upper tray, in the lower tray, or in both trays.

If you are using the Custom Tray Width feature, you should adjust the width of the image in the printer to match your nonstandard width paper.

To set a custom tray width, see the Cust. Tray Width option on the Paper Control menu. Refer to the User’s Manual for details.

NOTE: The Custom Tray Width feature requires specially-modified paper trays.

36