Chapter | 4 | Major Cleaning |
|
|
|
|
|
|
Photoreceptor Drum
CAUTION When cleaning the photoreceptor drum, observe the following precautions:
•Do not touch the drum surface with your hands.
•To prevent the drum surface from being scratched, clean it in a location free of dust.
•Cleaning the drum may result in stains. A drum left unused in the printer for a long time after cleaning may especially be affected. Therefore, after cleaning and installing the drum in the printer, use maximum size paper to print an image repeatedly until no stains remain. Stains will usually be cleared after printing a few dozen pages.
12.Remove the photoreceptor drum from the printer. (Refer to page 60.)
13.Place the drum on a covered work surface.
14.If the drum is only slightly dirty, clean it with ethanol or isopropyl alcohol. Do not use acetone.
124
