Reprinting Pages After Fault Condition
5.Press ONLINE to resume printing. Note that pages have been lost.
IMPORTANT If Reprint on Fault is disabled and an error occurs, and if either the “Reload Paper in Tractors” or “Not Reprinting Failed Pages” message appears, then any pages removed from the printer will not be reprinted, and the data on them will be lost.
Procedure For Fault Clearing - Reprint On Fault Enabled
1.A fault occurs.
2.Correct the fault condition.
3.Press CLEAR.
4.The STAND BY LED blinks and the following message appears while the printer attempts to clear fault:
Standby ...
Clearing Fault
•If the fault is not cleared:
a.The printer beeps and briefly displays the following message:
Faults Not Cleared
b.The printer then redisplays the original fault message, or any other uncleared fault message.
c.Attempt to clear the fault condition again, or contact your service representative.
•If the fault is cleared, and if you do not need to reload the paper into the tractors (for example, the printer ran out of toner):
a.The printer goes OFFLINE.
b.Press ONLINE to resume printing.
149
