Chapter | 2 | Stacker Full |
|
|
|
|
|
|
Stacker Full
1.When the stacker becomes full, the printer automatically separates the paper at the perforation, returning the edge of the paper to home position on the tractors.
2.Press the DOWN key on the stacker.
3.Remove all paper from the stacker elevator.
4.Press the AUTO key on the stacker to resume operation.
5.Press the CLEAR key on the printer control panel, to clear the fault message and place the printer online.
6.Check paper input to the printer to insure the first paper perforation is facing the printer and reload paper, if necessary, to align the first paper perforation.
7.If the Reprint on Fault option is enabled in the Paper Control menu, the printer reprints the applicable pages. See the User’s Manual for more detail.
8.Press the ONLINE key on the printer control panel, to place the printer online.
44
