Chapter 4 Maintenance Tools
If the print quality is still poor after cleaning the printer, the chargers may need to be replaced. Contact your authorized service representative for further assistance.
NOTE: For replacement intervals, see the maintenance schedules that begin on page 81. For replacement procedures, see Chapter 3, “Consumables Replacement."
Maintenance Tools
In order to perform maintenance on the printer, the following tools are required:
Item | Part Number |
|
|
Brush cleaner | |
|
|
Drum auxiliary rod | |
|
|
Drum freshener pad | |
|
|
Fuser cover glass scraper | |
|
|
Special dry tissue paper | |
|
|
Standard toner vacuum cleaner | See recommended |
| models below. |
|
|
Toraysee cloth | |
|
|
Wire cleaner | |
|
|
9 inch Phillips #1 screwdriver | N/A |
|
|
Recommended toner vacuum cleaner models are:
•3M®model
•3M model
•Hitachi®
78
