
SETTING A LEADING/TRAILING EDGE MARGIN
You can set a margin on the leading or trailing edge of the copy when you use Roll Feeder (option) in the Synchro Cut mode. When using the Bypass Table, and Preset/Variable Cut Mode you can only set the trailing edge margin.
Notes
❐You can set a margin of ±99mm, ±4.0” in 1mm, 0.1” steps on either the leading or trailing edge.
❐When you set a leading margin, the copy image is shifted to the trailing edge of the margin. When you make a copy in the Bypass Table, Preset Cut, or Variable Cut mode, the copy image might extend off the paper depending on the leading margin width.
1Press the Function Select key until the “Lead- ing Edge” or “Trailing Edge” indicator is lit.
Paper Length |
| Cut Select | ||
Synchro |
|
| ||
Preset/ |
|
| ||
Variable |
| Preset Cut | ||
Leading Edge |
|
| ||
Trailing Edge |
|
| ||
Copy Counter |
| Bypass Select/ | ||
|
|
|
| |
Function Select |
| Roll Paper Cut | ||
|
|
|
|
|
29